Gland Packing Medway Kent
Gland PackingIdeal applications include pumps, pulpers, agitators, mixers and any application where radial shaft movement may be present as well as abrasive products.
Products have proven to be hugely successful in the Paper Industry. Ideal applications include pumps, pulpers, agitators, mixers and any application where radial shaft movement may be present as well as abrasive products.
SEALRITE LIMITED offer an extensive range of Gland Packing types with a vast variety of materials and constructions to suit a wide range of industry applications.
All square-braided SEALRITE LIMITED Gland Packing is made using the most advanced braiding machines and materials available to maximise packing service life and performance.
To make installation easier and reduce maintenance time, we can also manufacture custom pre-formed Gland Packing rings to suit specific dimensional and application requirements.
Type 76.020
This packing is made from PTFE yarns and the reinforced corner yarns are made of Kevlar Fibre.
The PTFE provides additional lubricant properties while the Kevlar also provides rigidity and strength to the pure PTFE packing. Ideal for most high pressure applications.
Maximum Temperature: 280 degrees C
Maximum Pressure (pumps): 200 Bar
Maximum Pressure (valves): 250 Bar
PH: 2-13
Type 76.022
Graphite Braided Packing is made from Expanded Pure Graphite yarn.
This product is suitable to most applications such as hot water, steam, acids, organic solvents, hydrocarbons etc.
Ideal application for valve glands and pump glands, with built in lubricating properties, therefore reducing flush within a pump gland.
Temperature Range: -200 degrees C – 550 degrees C
Maximum working pressure (pumps): 30 Bar
Maximum working pressure (valves): 500 Bar
PH Range: 0-14
Type 76.023
This Packing is pure PTFE yarn braided into square cross section and impregnated with PTFE dispersion.
Very low coefficient of friction results in easy shaft running with minimal or no shaft wear.
Maximum Working Temperature: 260 degrees C
Maximum Working Pressure (pumps): 30 Bar
Maximum Working Pressure (valves): 300 Bar
PH Range: 0-14
Type 76.024B
Graphite Braided Packing is made from Expanded Pure Graphite yarn impregnated with PTFE. The PTFE lubricant is gradually squeezed out over a long period of time during operation.
This product, with additional self lubricating properties, is better suited for pump applications causing minimal or no damage to the shaft. It has high flexibility and volumetric stability together with excellent thermal conductivity.
Even after long periods, this product will not become brittle. Excellent resistance to chemicals.
Temperature Range: -200 degrees C – 280 degrees C
Maximum working pressure (pumps) 100 Bar
Maximum working pressure (valves) 25 Bar
PH Range: 0-14
Type 76.024W
Graphite and PTFE Braided Packing is made from Expanded Pure Graphite yarn together with PTFE fibre that gives added permanent lubrication.
This product, with additional self lubricating properties, is better suited for pump applications causing minimal or no damage to the shaft. It has high flexibility and volumetric stability together with excellent thermal conductivity.
Even after long periods, this product will not become brittle. Excellent resistance to chemicals.
Temperature Range: -200 degrees C – 280 degrees C
Maximum working pressure (pumps) 100 Bar
Maximum working pressure (valves) 25 Bar
PH Range: 0-14
Type 76.025
This product is a braided packing made from carbonised polyacrylonitrile fibre and finished with PTFE dispersion and lubricant.
Applications such as brine, salt water, factory waste, mineral oils, etc. are well within this product capability.
A very tough and robust packing yet very gentle to shafts and shaft sleeves.
Maximum Temperature: 260 degrees C
Maximum Pressure (pumps): 300 Bar
Maximum Pressure (valves): 20 Bar
PH: 2-13
Type 76.026
Kevlar fibre braided packing is made from DuPonts® Kevlar yarn impregnated with PTFE dispersion and processed with lubricant braided into square cross sections.
This packing is ideal for installing on its own or as end rings with other kinds of packing to combine different characteristics into a packing set. A perfect substitute to asbestos packing.
Used successfully in the Paper Industry, Power Industry, Mining etc.
Temperature Range: -100 degrees C – 360 degrees C
Maximum Pressure (pumps): 70 Bar
Maximum Pressure (valves): 100 Bar
PH: 2-12
Type 76.027A
High quality combination of graphite impregnated with PTFE and edge finished reinforcement made from Kevlar yarn to prevent gap extrusion in high pressure and high temperature applications. Excellent sliding properties and thermal conductivity.
Used frequently in positive displacement pumps and plunger pumps.
Suitable in applications such as sewage, paper pulp, hot water, oils, greases, seawater as well as relatively mild acids and alkaline solutions.
Maximum Temperature Range: -260 degrees C – 280 degrees C
Maximum Pressure Range: 500 Bar
PH: 2-13
Type 76.027B
Intermediately woven graphite with PTFE and Kevlar. This packing offers stability from the Kevlar and the additional lubricating properties from the graphite and PTFE. This product is better suited for higher speed applications than Type 76-027A.
Also very hardy but still gentle on shafts.
Maximum working Temperature: 280 oC
Maximum Pressure: 500 Bar
V m/s: 3
Type 76.029
The packing is made from raw film twists of pure PTFE dispersion resins and is suitable for both valves and pumps in the Food Processing Industry, Pharmaceutical Industry, Paper Mills etc. where high purity and corrosion resistance is required.
Maximum working Temperature: 260 degrees C
Maximum Pressure (pumps) 200 Bar
Maximum Pressure (valves) 20
PH Range: 2-13
Type 76.030
This packing is made from Ramie Fibre impregnated with PTFE dispersion plus lubricant.
The Silicone core gives the packing better memory, allowing it to withstand radial shaft movement and vibration while maintaining excellent leakage control.
This product has proven to be hugely successful in the Paper Industry. Ideal applications include pumps, pulpers, agitators, mixers and any application where radial shaft movement may be present as well as abrasive products.
Maximum Temperature Range: -50 degrees C – 140 degrees C
Maximum Pressure (pumps): 100 Bar
Maximum Pressure (valves): 12 Bar
PH Range: 2-12
Type 76.030A
This packing is made from Ramie Fibre impregnated with PTFE dispersion plus lubricant. This packing performs well where little shaft deflection is detected. This product has proven to be hugely successful in the Paper Industry and Brewery Industry.
Ideal applications include pumps, pulpers, agitators, mixers and any application where abrasives may be present.
Maximum Temperature Range: -50 degrees C – 140 degrees C
Maximum Pressure (pumps): 100 Bar
Maximum Pressure (valves): 12 Bar
PH Range: 2-12
Type 76.031
A universal low-chloride packing for valves and pumps in high temperature and pressure applications.
This product is manufactured from expanded pure graphite yarn with inconel wire reinforcement.
Temperature Range: -200 degrees C – 870 degrees C
Maximum working pressure (pumps) 30 Bar
Maximum working pressure (valves) 500 Bar
PH Range: 0-14
Type 76.042
This packing is woven from strong carbon fibre after softening treatment and impregnation with a mixture of fine graphite powder, PTFE dispersion and lubricant.
Having strong properties and excellent heat dissipation qualities, this product proves hugely successful in high speed applications.
Maximum Temperature: 600 degrees C
Maximum Pressure (pumps): 30 Bar
Maximum Pressure (valves): 250 Bar
V m/s: 20
PH: 0-14